A-pillar trim, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Cabrio, and 1998 Volkswagen Cabrio. However, it is still accessible from the selected car via links, so may be relevant.

Unclip clip -3- from A-pillar and insert into trim. See Figure .
Insert spreader clip -4- in mount hole on A-pillar.
Install A-pillar trim ensuring seal is correctly seated.