Center console, removing and installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Cabrio, and 1998 Volkswagen Cabrio. However, it is still accessible from the selected car via links, so may be relevant.
- Remove ashtray and screws -1-.
- Remove cover -A- from center console to rear and disconnect electrical connections.
- Remove nuts -2- and Phillips head screws -3- (left and right).
- Lift rear of console slightly and pull rearward. Disconnect electrical connections.