LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1999 >> Golf Wolfsburg Edition, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Readiness code >> Readiness code

Readiness code

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Function

The readiness code is an 8-digit number code which displays the status of the emission relevant diagnostic.

When the diagnostic for a system (e.g. secondary air system) has been successfully completed, the corresponding position in the number code will change from 1 to 0.

The diagnostic is performed at regular intervals during normal driving. It is recommended that the readiness code be generated after performing repairs on an emission relevant system, to guarantee that these systems function correctly. If a malfunction is detected during the diagnostic it will be entered in the DTC memory.

Each time the DTC memory is erased, the readiness code will be erased.

scientia non olet · About LEMON Manuals