Removing and installing spray nozzle
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Volkswagen Jetta, 2002 Volkswagen GTI, 2001 Volkswagen Jetta, 2001 Volkswagen GTI, and 2000 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Removing
Special tools, testers and auxiliary items required
- Drift, 4 and 6 mm dia.
NOTE:
- Spray nozzles are built into crankshaft bearings 2-6.
- Crankshaft disassembled
- Using a 4 mm drift, press out spray nozzles toward engine mount.
Installing
- Press in spray nozzles by hand using a 6 mm drift - arrow -.