Fuel Level Sensor G , removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, and 2004 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove fuel delivery unit refer to Fuel delivery unit, removing and installing .

Fig 1: Fuel Gauge Sender Connectors & Retaining Tabs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disengage connector prongs of wires - 3 - and - 4 - and disconnect.
Pry off retaining straps - 1 - and - 2 - using screwdriver and remove fuel gauge sensor towards bottom - arrows -.

Installing:

Insert fuel level sensor in guides on fuel delivery unit and push up until it engages.
Install Fuel Pump (FP) refer to Fuel delivery unit, removing and installing .