EVAP system, checking using tester KILL 9210: Introduction
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, and 2004 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
The KLI90210 EVAP tester allows testing using nitrogen to pressurize the EVAP system and a smoke generator or ultrasonic tester to locate the source of EVAP system concerns.
This procedure is intended as a general guide for the use of the EVAP tester. EVAP systems vary between models.
Special tools, testers and auxiliary items required
- VAS 5051 or VAS 5052 diagnostic tester
- KLI90210 EVAP system tester (set to 14 in. H 2 O)
- Light source (for viewing smoke)
- Hose Clamps up to 25mm dia. 3094 or equivalent
Using the KLI90210 EVAP system tester, refer to Tester operating instructions