Cylinder head, removing and installing: Notes

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, and 2004 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Cylinder Head, Removing And Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

Guide pins 3070
Drip Tray V.A.G 1306 or Drip Tray for VAS 6100 VAS 6208
Torque wrench V.A.G 1332
Spring-type clip pliers VAS 5024A

Polydrive Key 3452 or Polydrive Bit and Drive Socket T10070 (engines with polydrive cylinder head bolts)

Requirements

The engine must be no more than warm to the touch.