LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1999 >> Golf Wolfsburg Edition, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (1.8L - Engine Mechanical, Engine Code(S): AWD, AWW, AWP (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and connecting rod >> Pistons and connecting rods (engine code AWD, AWW), assembly overview >> Bearing shells - installed positions

Bearing shells - installed positions

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 Volkswagen GTI, 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, and 2004 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installation Position Of Bearing Shells
GW00000055Courtesy of VOLKSWAGEN UNITED STATES, INC.

Bearing shell - 1  - with oil bore - arrow  - for connecting rod.

Bearing shell - 2  - without oil bore for connecting rod cover.

Dimension - a  - must be the same at left and right. Max. deviation: 0.2 mm

scientia non olet · About LEMON Manuals