LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1999 >> Golf Wolfsburg Edition, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 13 - Engine - Crankshaft, Cylinder Block >> Crankshaft, removing and installing >> Crankshaft, removing and installing >> Removing and installing sender wheel

Removing and installing sender wheel

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing And Installing Sender Wheel
GW00000317Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing and installing sender wheel

NOTE:
  • The second time the bolts are tightened, the contact point of the countersunk head, in the sender wheel, is deformed sufficiently to allow the bolt head to seat - arrows  - on the crankshaft - 3  - , thus allowing the sender wheel to remain loose under the bolts.
scientia non olet · About LEMON Manuals