Golf, GTI
NOTE:
The following list refers to Fig 1.
- - Radiator grill - Golf
- Material: ASA
Removing:
- Remove screws -A-.
- Unlock lower catches at each end with screwdriver.
- Unlock remaining lower catches.
- Using both hands, pull radiator grill upward off lock carrier.
- Insert small tool (e.g. ice pick) into holes at -A- and press on catches (top of grill) and remove, then remove radiator grill.
Installing:
- Align radiator grill with center positioner (arrow).
- Fasten lower catches (end catches last).
- Fasten top catches.
- Install and tighten screws -A-.
- - Radiator grill - GTI
- Material: ASA
Removing:
- Remove screws -A-.
- Unlock lower catches at each end with screwdriver.
- Unlock remaining lower catches.
- Using both hands, pull radiator grill upward off lock carrier.
- Insert small tool (e.g. ice pick) into holes at -A- and press on catches (top of grill) and remove, then remove radiator grill.
Installing:
- Align radiator grill with center positioner (arrow).
- Fasten lower catches (end catches last).
- Fasten top catches.
- Install and tighten screws -A-.
- - Radiator grill fins-GTI
- Material: ABS (acrylic-nitrile butadiene-styrene copolymeride)
- Clipped in radiator grill -2-
- Painted in body color
- - Panel
- Removing: Remove radiator grill and unclip panel from radiator grill.
- Painted in body color
- - VW emblem
- Clipped in radiator grillCAUTION: Remove and install the VW emblem -5- very carefully to avoid damaging the paint finish.
- Clipped in radiator grill