Removing and installing towing eye cover (lens): Removing

Insert screwdriver between turn signal housing -1- and towing eye cover (lens) -2-. Carefully lift cover (arrow) from plastic retaining clips located on turn signal housing.

Fig 1: Inserting Screwdriver Between Turn Signal Housing And Towing Eye Cover (Lens)
Detach spring clips from opposite side or from fog light housing -3- (if equipped) and remove cover from opening.
CAUTION: To avoid damaging the turn signal housing clips, insert a screwdriver between the housing - 1- and towing eye cover (lens) -2- and NOT between the cover and bumper opening or fog light.