Sill panel trim, removing and installing
NOTE:
The following list refers to items in Fig 1
.
- - Sill panel trim
Removing:
- Remove securing clip - 2 -.
- Press onto sill panel trim (arrow B) and simultaneously unhook lower sill panel trim (arrow C).
- Pull sill panel trim off clips - 7 -.
- - Securing clip
- Two part
Removing:
- Unscrew inner part with a Phillips screwdriver
Installing:
- Press outer part and inner part in turn into mounting hole
- - Press button
- Unscrew or press on
- - Plug
- Pry out with lever 80-200
- - Trim
- Rear part
Removing:
- Remove sill panel trim - 1 -.
- Unscrew press button - 3 - and pry out plug - 4 -.
- Slide clip - 6 - on its seating rearward (arrow A). To do this, grip from inside of seat frame through opening (arrow D).
- Remove trim.
Installing:
- First slide clip - 6 - completely back onto its seat.
- - Clip
- - Clip