Lock alarm/central locking switch -F124-, removing: Removing
- Remove rear lid trim.
Refer to REAR LID .
- Disconnect 2-pin connector.
- Remove rear lid lock.
Refer to REAR LID LOCK, REMOVING AND INSTALLING UP TO 03.98 or REAR LID, REMOVING AND INSTALLING LOCK FROM 03.98 AND ON .
- Insert key into lock cylinder and turn lock cylinder clockwise to stop.
- Carefully pry contact switch -1- from locating pins.
CAUTION:
Part numbers are for reference only. Always check with your Parts Department for the latest parts information.