Evaluating display group number 003

Evaluating Display Group 003

Display Zone	Designation	Display contents	Corrective action
1	Voltage supply	correct too low too high	Battery voltage min. 9 Volt. Check alternator. Check voltage regulator. Visual check of wiring.
2	Passenger side seat occupant detection	not installed	no malfunction present
3	Left seat belt switch -E24-	not installed Belt: yes Belt: no too high too low too Ground (GND) to B+ not defined	If the switch is not installed of if "belt: yes" is displayed with belt tongue inserted or "belt: no" with the belt tongue not inserted, no malfunction is present. Visual check of wiring. Check harness connectors of the respective electrical circuit for proper and secure seating and observe the display at the same time. If the display content changes to "correct", erase DTC memory.
4	Right seat belt switch -E25-	not installed Belt: yes Belt: no too high too low too Ground (GND) to B+ not defined	Repair faulty wires or harness connectors Replace driver or passenger-side belt switch