Selectable functions, overview
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, 2006 Volkswagen Golf, and 2006 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
| Reference | |
| 01 - Check Control Module Version | Check Control Module Version |
| 02 - Check DTC Memory | Check DTC Memory |
| 03 - Output Diagnostic Test Mode | Output Diagnostic Test Mode (DTM), vehicles from 06.01 on |
| 05 - Erase DTC memory | Erase DTC memory |
| 06 - End Output | End Output |
| 07 - Code Control Module | Convenience System Control Module, coding |
| 08 - Read Measuring Value Block | Read measuring value block, vehicles from 06.01 on |
| 10 - Adaptation | Adaptation |
NOTE:
- A list of possible functions is printed out after pressing the HELP button.
- Do not select further functions, which can be printed out after pressing the HELP button.
- After the function is completed the V.A.G 1551 returns to the following start position:
Indicated on display:
| Rapid data transfer HELP Select function XX |