LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1997 >> Cabrio Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Body On Board Diagnostic (OBD) (A4 Platform) [Convenience System (Vehicles With Power Windows), On Board Diagnostic (OBD)]) >> 01 On Board Diagnostic (OBD) >> Convenience System (Vehicles With Power Windows), On Board Diagnostic (OBD) >> Display group overview, vehicles through 05.01 >> Evaluating display group number 013

Evaluating display group number 013

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, 2006 Volkswagen Golf, and 2006 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Display zone  Description  Display  Corrective action 
1 Permanent code known OK.
not OK.
no measured value2)
(Key currently not being operated)		 If not OK.
  • Key code is outside the code range. "Re-synchronize" radio wave remote control via function 10 (adaptation). Refer to Adaptation  .

For no measured value:
  • Battery in key is discharged. Change battery.
  • Radio wave remote control malfunctioning, replace key.
2 Code within effective range    
3 Algorithm    
1 key number mv = 1 to 41) When operating a "synchronized" radio wave key, the position of the "synchronized" key is shown. If the tester displays "0" even when the remote key is pressed, this key must be "re-synchronized" using adaptation (10).

1) A max. of 4 remote controls can be "learned".

2) If the remote control key is operated several times the third display - no measured value - will change to "OK."

scientia non olet · About LEMON Manuals