Evaluating display group number 012

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2009 Volkswagen Jetta, 2008 Volkswagen Jetta, 2007 Volkswagen Jetta, 2006 Volkswagen Golf, and 2006 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Display zone

Description

Display

Corrective action

Check bus

Bus OK.
Bus not OK.

Visual check of wiring
Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display

If the display does not change when operating, repair malfunction or replace relevant component
If no changes occur, separate all door main connectors and reconnect one after the other again

Observe measured value block
If display changes, replace relevant control module

Erase DTC memory
Perform functional check

Check DTC memory again

Continued on next chart

Display zone	Description	Display	Corrective action
2	Front equipment	driver driver and passenger passenger empty1)	These display zones simply show the relevant vehicle equipment For example, checks can be made to see which control modules are actively connected to the system and which are not
3	Rear equipment	rl rl and rr rr empty1)
4	Optional equipment	memory empty1)

1) Empty means in this case: Display zone is blank

Example:

For DTC "Door control module (DCU), rear left not answering" can be directly seen if the DCU is connected.

For example, only "rr" is shown in display zone 3.