Start of injection, dynamically checking and adjusting: Notes
WARNING: This page is about a different car, the 1999 Volkswagen Jetta, 1998 Volkswagen Jetta, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Dynamically checking and correcting start of injection is only possible using "Basic Setting" scan tool function 04.
NOTE:
Start of injection must always be checked and adjusted after:
- Replacing the toothed belt
- Loosening the Diesel injection pump mounting bolts
- Loosening the toothed belt sprockets