Engine codes 1Z, AHU
WARNING: This page is about a different car, the 1999 Volkswagen Jetta, 1998 Volkswagen Jetta, 1997 Volkswagen Jetta, 1996 Volkswagen Passat, and 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Remove injection pump sprocket mounting nut.
- Loosen puller arms and raise up.
- Locate puller arms through holes in injection pump sprocket and tighten.
- Using puller, place injection pump sprocket under tension.
- Release injection pump sprocket from injection pump taper by tapping on puller spindle (arrow). Hold onto sprocket to prevent it from dropping.