Headlights (Cabrio from 10.98), removing and installing

• Remove front bumper.

Refer to FRONT BUMPER, SERVICING .

• Remove securing screws -arrows- and pull headlight housing out slightly toward front.
Fig 1: Removing Headlight Housing Securing Screws (Cabrio From 10.98)
Courtesy of VOLKSWAGEN OF AMERICA, INC.
• Disconnect headlight multi-pin harness connector.
• Pull headlight housing out toward front.

  Install in reverse order of removal.

• Check headlight positioning and adjust if necessary, refer to HEADLIGHTS (CABRIO FROM 10.98), ADJUSTING .