Front turn signal bulb, replacing

• Disengage spring clip -arrow- and remove sealing cap.
  Fig 1: Removing Front Turn Signal Bulb Sealing Cap (Cabrio From 10.98)

  Courtesy of VOLKSWAGEN OF AMERICA, INC.
• Turn bulb holder -arrow- to left and pull out of housing.
Fig 2: Removing Front Turn Signal Bulb From Bulb Holder (Cabrio From 10.98)
Courtesy of VOLKSWAGEN OF AMERICA, INC.
• Remove bulb from bulb holder.

Installation is in reverse order of removal.

• Always check turn signal function after installing new bulb.