Brake Shoes &/Or Pads: Remove & Replace
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All | 2.2 | B | ||
| Front | 1.0 | B | ||
| Rear | DOES NOT include R&I Wheel Hubs. | 1.4 | B | |
| Combination Procedure: BRAKE HOSE: Replace: Includes: Bleed Brake System. | ||||
| Each Additional | 0.2 | B | ||
| One | 0.3 | B | ||
| Combination Procedure: CALIPER: Overhaul: Includes: Bleed System. | ||||
| One | 0.5 | B | ||
| Combination Procedure: CALIPER: Replace: Includes: Bleed System. | ||||
| One | 0.3 | B | ||
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: | ||||
| 0.5 | B | |||
| Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: | ||||
| RWD, Each | Includes: Repack Wheel Bearings. | 0.4 | B | |
| Combination Procedure: DISC ROTOR: Replace: | ||||
| RWD, Each | Includes: Repack Wheel Bearings. | 0.4 | B | |
| Combination Procedure: DRUM: Replace: | ||||
| Each | 0.1 | B | ||
| Combination Procedure: WHEEL BEARING: Repack: | ||||
| RWD, Front | 0.8 | B | ||
| Combination Procedure: WHEEL BEARING: Replace: Includes: Repack Bearings (where applicable). | ||||
| Rear,One Side | Refer to Rear Wheel Bearing - R&R. | B | ||
| Combination Procedure: WHEEL CYLINDER: Overhaul: Includes: Bleed System. | ||||
| Off Vehicle,One | 0.5 | B | ||
| On Vehicle,One | 0.3 | B | ||
| Combination Procedure: WHEEL CYLINDER: Replace: Includes: Bleed System. | ||||
| One | 0.3 | B | ||
| Combination Procedure: WHEEL SEAL: Replace: | ||||
| Rear | Refer to Rear Wheel Seal - R&R. | B | ||