LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1985 >> GTI HT >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Pads >> Installation (Girling - FWD Models)

Installation (Girling - FWD Models)

  1. Seat piston fully into cylinder bore by hand or using Piston Compressor (US 1023/4). Attach retaining springs to pad carrier. Install inner pad first and then install outer pad in carrier.
  2. Install caliper housing into pad carrier. DO NOT force caliper any further than necessary to start Allen head mounting bolts. Excessive force could distort springs, which would cause noises during braking. Tighten mounting bolts to 18 ft. lbs. (25 N.m).
scientia non olet · About LEMON Manuals