LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1984 >> Vanagon Base, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - 090 >> Testing >> Stall Speed Test >> Testing Procedure

Testing Procedure

  1. With engine at normal operating temperature, connect a tachometer to engine. Start engine and set parking and service brakes. Place selector lever in "D". Depress accelerator briefly to full throttle and note maximum RPM obtained. Repeat test with selector lever in "1" position. Engine speed should be within limits shown in table.
  2. Depress accelerator briefly to full throttle and note maximum RPM obtained. Repeat test with selector lever in "1" position. Engine speed should be within limits shown in STALL SPEED SPECIFICATIONS  table.
NOTE: Normal stall speed will drop about 125 RPM per 3200 feet altitude. Also, stall speed will drop slightly at high ambient temperature.
STALL SPEED SPECIFICATIONS

Application Stall RPM
All Models 1950-2250
scientia non olet · About LEMON Manuals