Stall Speed Test Results
- If stall speed is higher than specified, forward clutch or 1st gear one-way clutch is slipping. If stall speed in "D" is too high, repeat stall test in "1". If RPM is within specifications, one-way clutch for 1st gear is defective. If stall speed RPM is still too high, forward clutch is defective. ,
- If stall speed is approximately 200 RPM below specifications, engine performance may be unsatisfactory. If stall speed is approximately 400 RPM below specifications, torque converter stator one-way clutch is defective and complete converter should be replaced.