Valve Stem Seals And Springs
WARNING: This page is about a different car, the 1983 Volkswagen Vanagon, 1983 Volkswagen Rabbit, 1983 Volkswagen Quantum, 1983 Volkswagen Pickup, and 1983 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is possible to replace valve springs and seals with head installed provided camshaft and tappets are removed. Piston of cylinder concerned must be at top dead center position
Use spring compressor to depress spring and retainer. Remove keepers, then remove retainer and springs. Remove stem seal. Use protective sleeve over valve stem and install new seal. Complete assembly in reverse order of disassembly.