LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1984 >> Vanagon Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (1.6L 4-CYL Diesel/Turbo Diesel) >> Crankshaft Main & Connecting Rod Bearings >> Front Main Bearing Oil Seal & Intermediate Shaft Oil Seal >> Removal (All Others)

Removal (All Others)

WARNING: This page is about a different car, the 1983 Volkswagen Vanagon, 1983 Volkswagen Rabbit, 1983 Volkswagen Quantum, 1983 Volkswagen Pickup, and 1983 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Remove camshaft belt and crankshaft sprocket. On Vanagon, screw seal extractor 2085 (or equivalent) into seal to remove. On all others, pry seal from carrier using care not to damage carrier. Use seal extractor 10-219 (or equivalent) to remove seal.

scientia non olet · About LEMON Manuals