LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1984 >> Vanagon Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.9L Water-Cooled 4-CYL >> Engine Oiling >> Oil Pump >> Installation

Oil Pump: Installation

  1. Lightly coat THICK oil pump body gasket with sealer. Place over studs against crankcase. Carefully tap pump body into crankcase with soft mallet. Make sure to align studs and pump body. Avoid tearing gasket edge.
  2. Place drive gear in pump body and rotate until lug fits into groove on face of camshaft. Install driven gear, rotating crankshaft slightly to align gear teeth. Install dry THIN oil pump cover gasket over studs.
  3. Place pump cover plate on studs. Tighten new sealing nuts in diagonal pattern. Sealing ring of nut faces oil pump cover. Install remaining parts in reverse of removal. Install engine. Make sure engine has oil pressure after starting.
scientia non olet · About LEMON Manuals