LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1984 >> Vanagon Base, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Disc Brake Caliper >> Disassembly - Teves & Girling (Vanagon)

Disassembly - Teves & Girling (Vanagon)

  1. Remove disc pads and damping plates as previously described. Clamp mounting flange in a soft-jawed vise, and remove dust boot retainer (if equipped), and dust boot.
  2. Install Piston Retainer Clamp (US 1023/5) on 1 piston. Insert wooden block in caliper, and force piston out using compressed air. Repeat procedure for opposite piston. Remove piston seals without damaging bore.