LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1984 >> Vanagon Base, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Wheel Bearing >> Removal

Wheel Bearing: Removal

  1. Raise vehicle and support with safety stands. Remove wheel assembly. Remove dust cap. Pry flange on hub nut out of recess in shaft and loosen hub nut.
  2. Remove caliper and support out of the way. Remove hub nut, washer, outer bearing and hub. Remove seal and inner bearing from hub.
scientia non olet · About LEMON Manuals