LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1984 >> Vanagon Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 1.9L Water-Cooled 4-CYL >> Engine, Manifolds, & Cylinder Head >> Intake Manifold >> Installation

Intake Manifold: Installation

Installation procedure is reverse of removal. Always use new gaskets between heads and manifold ends. Make sure all hose clamps are tight. Bleed cooling system and check for leaks. See WATER PUMP  Installation. Adjust accelerator cable (on M/T models) or rod (on A/T models).

scientia non olet · About LEMON Manuals