All Others (1963-73)

While rotating hub, torque spindle nut to 18 ft. lbs. (2.487 mkg). Loosen nut 1/2 of a turn while tapping gently on stub axle to ensure proper seating of outboard bearing. Retorque nut to 10.8 ft. lbs. (1.492 mkg) and loosen 1/4 of a turn. Install cotter pin, tightening nut to install if necessary. End play of hub is checked with a suitable dial indicator and should be 0.0008 - 0.0047" (0.020 - 0.119 mm).