Instrument Panel HMI Trim Cover Removal And Installation/Replacement

Mobile Repair Possible:  Van/Car

Overview: 

Removal Procedure: 

Courtesy of VINFAST, LLC

1. Carefully unclip the instrument panel HMI trim cover (1) at the indicated areas (black arrows) using a suitable plastic wedge and remove in the direction of the arrow.

Installation Procedure: 

Courtesy of VINFAST, LLC

Installation note: Check latches (1) for damage and replace instrument panel HMI trim cover if needed. 

Installation note: Check clips (1) for damage and replace if needed. 

1. Installation is the reverse of removal procedure.