Head-Up Display (HUD) Removal And Installation/Replacement

Mobile Repair Possible:  No

Removal Procedure: 

1. Remove Instrument Panel Assembly. Refer to INSTRUMENT PANEL ASSEMBLY REMOVAL AND INSTALLATION/REPLACEMENT

   Courtesy of VINFAST, LLC

2. Remove 4 screws (1).

   Torque: 5 Nm 

   Courtesy of VINFAST, LLC

3. Unlock and disconnect electrical connector (1).
4. Remove Head-Up Display.

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following. All fasteners must be tightened to torque specification! 
2. Install Instrument Panel Assembly. Refer to INSTRUMENT PANEL ASSEMBLY REMOVAL AND INSTALLATION/REPLACEMENT
3. Diagnostics, Programming and Setup. Refer to DIAGNOSTICS, PROGRAMMING AND SETUP USING SCAN TOOL IN SERVICE