LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Supra Premium, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake / Exhaust System (B58) - Service Information >> Inlet Turbo Oil Pipe >> Installation [03/2020 - ] >> Procedure

Installation [03/2020 - ]: Procedure

  1. INSTALL INLET TURBO OIL PIPE SUB-ASSEMBLY 
    1. Replace O-rings (1) and (2).
      GTY997218Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Position the inlet turbo oil pipe sub-assembly (3).
  2. INSTALL NO. 2 TURBO WATER PIPE SUB-ASSEMBLY 

    See step  1

  3. INSTALL TURBOCHARGER SUB-ASSEMBLY 

    Refer to INSTALLATION [03/2020 - ] 

scientia non olet · About LEMON Manuals