LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> Supra Premium, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Intake / Exhaust System (B58) - Service Information >> Exhaust Manifold Heat Insulator >> Removal [03/2020 - ] >> Procedure

Removal [03/2020 - ]: Procedure

  1. REMOVE AIR CLEANER ASSEMBLY 

    Refer to REMOVAL [03/2019 - ] 

  2. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR 
    1. Loosen screws (1).
      GTY976877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen screw (2).
    3. Feed out and remove the No. 1 exhaust manifold heat Insulator (3).
    4. Loosen screws (1).
      GTY976875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Feed out and remove the No. 1 exhaust manifold heat Insulator (2).
scientia non olet · About LEMON Manuals