Caution / Notice / Hint
WARNING:
- Working on 12 V vehicle electrical system.
Risk of short circuits! Risk of fire!
- Detach the cable from the negative (-) battery terminal.
- w/ No. 2 Battery: Detach the cable from the negative (-) battery terminal of the No. 2 battery.
NOTE:
- Before performing work on electronic components, disconnect the cable from the negative (-) battery terminal to prevent damage to the electrical system or components.
- When disconnecting the cable, turn the START-STOP button (engine switch) and headlight switch off and loosen the cable nut completely. Perform these operations without twisting or prying on the cable. Then disconnect the cable.
- Clock settings, radio settings, audio system memory, DTCs and other data will be cleared when the cable is disconnected from the negative (-) battery terminal. Write down any necessary data before disconnecting the cable.