DTC C13AA: EPB High Temperature [11/2018 - 12/2021]: Description
WARNING: This page is about a different variant/trim than selected.
If the electric parking brake is used continuously, the parking brake actuator assembly overheat prevention stops the system.
This DTC is stored to protect the system and is not a malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| C13AA | EPB High Temperature | Both of following conditions are met:
|
Overheat due to continuous use of system | Yes | A message is displayed on the multi-information display indicating electric parking brake system operation is stopped due to high temperatures. HINT: EPB stands for Electric Parking Brake. |
DTC DETECTION CONDITION COMBINATION TABLE: C13AA
| Vehicle Condition | |||
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | Electric parking brake operating | ◦ | ◦ |
| Malfunction Status | Lock and release operations are performed within less than 2 seconds | ◦ | - |
| Lock and release operations are performed within less than 2 seconds and target current is not achieved during lock control | - | ◦ | |
| Detection Time | The malfunction status repeats 10 times | The malfunction status repeats 4 times or more | |
| Trip Count | 1 trip | 1 trip | |
HINT:
If the conditions match either of these patterns, a DTC will be output.