Removal [10/2022 - ]: Procedure

• for 2WD:

  Refer to REMOVAL [10/2022 - ]

• for HV Model AWD:

  Refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ]

• for Gasoline Model AWD:

  Refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ]

1. Remove the bolt, nut and rear upper control arm assembly LH from the rear suspension member sub-assembly.
   NOTE:

   Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Perform the same procedure as for the LH side.