Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF [11/2018 - ]: Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK OPERATION OF AUTO FUNCTION
- Check that the AUTO function operates when the operating conditions are met.
HINT:
Do not use the multi-information display to determine whether the AUTO function is operating or not.
Result
Result Proceed to The AUTO function operates A The AUTO function does not operate B
Result:
A
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [11/2018 - 10/2022] , or refer to REMOVAL [10/2022 - ]
Result:
B
GO TO Electric Parking Brake System AUTO Function Circuit. Refer to Electric Parking Brake System AUTO Function Circuit [11/2018 - 08/2020] , or refer to Electric Parking Brake System AUTO Function Circuit [08/2020 - ]
- Check that the AUTO function operates when the operating conditions are met.