Disassembly [06/2020 - ]: Procedure

REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

HINT:

When removing the side mudguard LH, if the double-sided tape is difficult to remove, heat the adhesive of the front wheel opening extension pad LH and front wheel opening extension pad LH using a heat light.

Item	Temperature
Side Mudguard LH	20 to 30°C (68 to 86°F)
Front Wheel Opening Extension Pad LH	20 to 30°C (68 to 86°F)

WARNING:

Do not touch the heat light and heated parts.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.

NOTE:

Do not heat the side LH and front wheel opening extension pad LH excessively.

Remove the front wheel opening extension pad LH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

REMOVE NO. 3 MOULDING TAPE

HINT:

When removing the side mudguard LH, if the double-sided tape is difficult to remove, heat the adhesive of the front wheel opening extension pad LH and No. 3 moulding tape using a heat light.

Item	Temperature
Side Mudguard LH	20 to 30°C (68 to 86°F)
No. 3 Moulding Tape	20 to 30°C (68 to 86°F)

WARNING:

Do not touch the heat light and heated parts.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Heated Part
*b	Heat Light

Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.

NOTE:

Do not heat the side LH and No. 3 moulding tape excessively.

Detach the double-sided tape.

Remove in this Direction

Remove the No. 3 moulding tape.