LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid XSE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock System - Service Information (PHEV) >> Door Control Switch >> Removal [06/2020 - ] >> Procedure

Removal [06/2020 - ]: Procedure

  1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL 

    Refer to PROCEDURE - Step 8 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 8 [12/2021 - 10/2022] , or refer to PROCEDURE - Step 8 [10/2022 - ]

  2. REMOVE DOOR CONTROL SWITCH ASSEMBLY 
    1. Using a screwdriver with its tip wrapped with protective tape, detach the claw and remove the door control switch assembly.
      GTY922025Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
scientia non olet · About LEMON Manuals