LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid XSE >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System - Service Information (PHEV) >> Radio Receiver >> Removal [06/2020 - 10/2022] >> Procedure

Removal [06/2020 - 10/2022]: Procedure

  1. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 6 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 6 [12/2021 - 10/2022]

  2. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts.
      GTY943841Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY916106Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction

      Detach the clip and remove the radio and display receiver assembly with bracket.

    3. Disconnect each connector.
  3. REMOVE NO. 1 RADIO RECEIVER BRACKET 
    1. Remove the 2 screws and No. 1 radio receiver bracket.
      GTY984846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 2 RADIO RECEIVER BRACKET 
    1. Remove the 2 screws and No. 2 radio receiver bracket.
      GTY984850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY 
scientia non olet · About LEMON Manuals