LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid XSE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information (PHEV) >> Trip Switch >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

  1. INSTALL TRIP SWITCH 
    1. Attach the claw to install the trip switch as shown in the illustration.
      GTY1119777Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
  2. INSTALL FUSE BOX OPENING COVER 

    Refer to PROCEDURE - Step 20

  3. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 21

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 24

  5. INSTALL COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 25

  6. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 40

scientia non olet · About LEMON Manuals