Installation [06/2020 - ]: Procedure

INSTALL LIGHT CONTROL RHEOSTAT

Attach the claw to install the light control rheostat as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

INSTALL FUSE BOX OPENING COVER
Refer to PROCEDURE - Step 20 [06/2020 - 10/2022] , or refer to PROCEDURE - Step 20 [10/2022 - ]
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 21 [06/2020 - 10/2022] , or refer to PROCEDURE - Step 21 [10/2022 - ]
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 24 [06/2020 - 10/2022] , or refer to PROCEDURE - Step 24 [10/2022 - ]
INSTALL COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 25 [06/2020 - 10/2022] , or refer to PROCEDURE - Step 25 [10/2022 - ]
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 40 [06/2020 - 12/2021] , or refer to PROCEDURE - Step 40 [12/2021 - ]