Removal [06/2020 - ]: Procedure

1. Detach the claw and guide and remove the sensor cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Pull the stopper in the direction (1) indicated by the arrow shown in the illustration to release the lock.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Stopper
   	Remove in this Direction (1)
   	Remove in this Direction (2)

2. Pull the air conditioning thermistor assembly in the direction (2) indicated by the arrow shown in the illustration and remove it.
3. Disconnect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   If the air conditioning thermistor assembly has been dropped, replace it with a new one.

Refer to PROCEDURE - Step 1

Refer to PROCEDURE - Step 2