Speedometer Malfunction [06/2020 - ]: Procedure
- CHECK CAN COMMUNICATION SYSTEM
- Check if CAN communication DTCs are output.
Refer to DIAGNOSIS SYSTEM [06/2020 - 12/2021] , or refer to DIAGNOSIS SYSTEM [12/2021 - 10/2022] , or refer to DIAGNOSIS SYSTEM [10/2022 - 10/2023] , or refer to DIAGNOSIS SYSTEM [10/2023 - ]
Result
Result Proceed to CAN communication DTCs are not output. A CAN communication DTCs are output. B
Result:
B
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2020 - 12/2021] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2021 - 10/2022] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - ]
Result:
A
See step 2
- Check if CAN communication DTCs are output.
- CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
- Check for DTCs.
Refer to DTC CHECK / CLEAR [06/2020 - ]
Chassis > Brake/EPB > Trouble Codes
Result
Result Proceed to Electronically controlled brake system DTCs are not output. A Electronically controlled brake system DTC is output. B
Result:
B
GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2020 - 12/2021] , or refer to DIAGNOSTIC TROUBLE CODE CHART [12/2021 - 10/2022] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 10/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2023 - ]
Result:
A
See step 3
- Check for DTCs.
- PERFORM ACTIVE TEST USING GTS
- Using the GTS, read the Data List.
Refer to DATA LIST / ACTIVE TEST [06/2020 - 10/2022] , or refer to DATA LIST / ACTIVE TEST [10/2022 - ]
Body Electrical > Combination Meter > Active Test
Tester Display Control Range Diagnostic Note Speedometer Operation (0km/h, 0MPH) Speedometer 0 km/h (0 mph) - Speedometer Operation (40km/h, 40MPH) Speedometer 40 km/h (40 mph) The value displayed on the speedometer may deviate.
Reference km/h:
40 → 38.5 to 43.0
Reference mph:
40 → 39.3 to 42.1Speedometer Operation (80km/h, 80MPH) Speedometer 80 km/h (80 mph) The value displayed on the speedometer may deviate.
Reference km/h:
80 → 78.9 to 83.9
Reference mph:
80 → 79.8 to 83.0Speedometer Operation (120km/h, 120MPH) Speedometer 120 km/h (120 mph) The value displayed on the speedometer may deviate.
Reference km/h:
120 → 119.6 to 124.6
Reference mph:
120 → 120.5 to 123.7Speedometer Operation (160km/h, 160MPH) Speedometer 160 km/h (160 mph) The value displayed on the speedometer may deviate.
Reference km/h:
160 → 159.8 to 165.2Speedometer Operation (200km/h, 200MPH) Speedometer 200 km/h (200 mph) The value displayed on the speedometer may deviate.
Reference km/h:
200 → 200.9 to 205.9Body Electrical > Combination Meter > Active Test
Tester Display Speedometer Operation (0km/h, 0MPH) Body Electrical > Combination Meter > Active Test
Tester Display Speedometer Operation (40km/h, 40MPH) Body Electrical > Combination Meter > Active Test
Tester Display Speedometer Operation (80km/h, 80MPH) Body Electrical > Combination Meter > Active Test
Tester Display Speedometer Operation (120km/h, 120MPH) Body Electrical > Combination Meter > Active Test
Tester Display Speedometer Operation (160km/h, 160MPH) Body Electrical > Combination Meter > Active Test
Tester Display Speedometer Operation (200km/h, 200MPH) OK
Speedometer indication is normal.
Result
Proceed to OK NG
Result:
OK
REPLACE BRAKE ACTUATOR ASSEMBLY (NO. 2 SKID CONTROL ECU). Refer to REMOVAL [06/2020 - 12/2021] , or refer to REMOVAL [12/2021 - 10/2022] , or refer to REMOVAL [10/2022 - ]
Result:
NG
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [06/2020 - 10/2022] , or refer to REMOVAL [10/2022 - ]
- Using the GTS, read the Data List.