Caution / Notice / Hint

NOTE:

If the vehicle speed is outside the allowable range when tested, perform the on-vehicle inspection.
Refer to OPERATION CHECK [06/2020 - ]
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
When the combination meter assembly is replaced, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [06/2020 - ]

HINT:

Before starting the following inspection, check tire size and tire air pressure.