Meter Illumination is Always Dark [06/2020 - 12/2021]: Procedure
- CHECK CAN COMMUNICATION SYSTEM
- Check if CAN communication DTCs are output.
Refer to DIAGNOSIS SYSTEM [06/2020 - 12/2021]
Result
Result Proceed to CAN communication DTCs are not output. A CAN communication DTCs are output. B
Result:
B
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2020 - 12/2021]
Result:
A
See step 2
- Check if CAN communication DTCs are output.
- CHECK FOR DTC (LIGHTING SYSTEM)
- Check if lighting system DTCs are output.
w/ AFS: Refer to DTC CHECK / CLEAR [06/2020 - 12/2021]
w/o AFS: Refer to DTC CHECK / CLEAR [06/2020 - 12/2021]
Body Electrical > Main Body > Trouble Codes
OK
DTC B1244-00 is not output.
Result
Proceed to OK NG
Result:
NG
GO TO DTC B1244-00
w/ AFS: Refer to DTC B1244-00: Light Sensor Circuit Malfunction [06/2020 - 12/2021]
w/o AFS: Refer to DTC B1244-00: Light Sensor Circuit Malfunction [06/2020 - 12/2021]
Result:
OK
See step 3
- Check if lighting system DTCs are output.
- CHECK COMBINATION METER ASSEMBLY
- Replace the combination meter assembly with a new one.
Refer to REMOVAL [06/2020 - 10/2022]
- Check the operation.
OK
The operation of the combination meter assembly returns to normal.
Result
Proceed to OK NG
Result:
OK
END (COMBINATION METER ASSEMBLY IS DEFECTIVE)
Result:
NG
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [06/2020 - 12/2021]
- Replace the combination meter assembly with a new one.