LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2025 >> RAV4 Plug-In Hybrid SE >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (6 Of 6) & Circuit Tests (PHEV) >> Electronically Controlled Brake System >> Zero Point Calibration of Yaw Rate Sensor Undone (X204C) [06/2020 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".

    Refer to UTILITY [06/2020 - ]

  • After replacing or reinstalling the yaw rate and acceleration sensor (airbag ECU assembly), perform "Calibration".

    Refer to UTILITY [06/2020 - ]